Details: material and labour for preparing old black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with using air blower to remove all loose dirt etc complete and applying evenly a coat of cold polymer modified emulsion (pme) by using mechanical sprayer, spraying of total cold liquid pme 0.5 litre per sqm (undiluted) for one coat with mineral filler as recommended by manufacture of pme(after diluting with water), each coat diluted with in the ratio 1:1(pme:water) and ensure uniform finish on applied area . complete all as per manufacturer instruction and all as specified and directed..notes:- the tender shall take into consideration the following points while coating the rates for this item:(a) the work shall be carried out by the manufacturer or his authorised applicator only.(b) care shall be taken to fill wider gaps/cracks with 0.60 mm to 2.36 mm size coarse sand as per manufacture's instructions.(c) a perf
Sector: Defense