Details: replacement of existing retro reflective sheet of various type of sign boards with retro reflective sign plate made out of 3.0 mm thick aluminium composite panel, face to be covered with green type iv retro reflective sheeting and the matters & logo with overlay film type of sheeting after the etching treatment of aluminium sheeting on existing frame. the back side of the sheeting should be covered with two coats of epoxy/powder coating. the sheet shall be fixed on existing frame of angle iron. the work also includes removal of existing damaged sheet form boards with due care and disposal at suitable place including transportation charges. rate inclusive of all taxes. painting of existing overhead gantry board with enamel paint including rubbing of rusted surface by emery paper, applying of red oxide, primer , all required scaffolding etc complete in all respect as per directions of engineer incharge. rate inclusive of all taxes. painting of existing cantilever board with enamel paint
Sector: Industry Development