Details: supply & delivery of 100 wp solar pv module (ertl & flash tested), the module shall contain poly crystalline silicon solar cell and must have a testing confirming to iec 61215 edition ii certified, mnre approved with build in blocking diode with 10 years warranty , shall have device life more than 25 years limited power less not more than 10% of nominal output at the end of 10 years and not more than 20% at the end of 25years.the solar module shall be able to withstand the temp extremes ranging from -10*c to + 85*c and the wind load of wind speed @120km/hr. maximum mean hour rain fall of 40mm, humidity level up to 90% mnre approved grade solar panel. cell material - poly crystal silicon solar cell. capacity - the power output of the module (s) should not less than 60 watt peak. the operating voltage corresponding to the power output mention above should be 16.5v .the pcb of the pv module under stc should be at least 21v.calculation under average daily isolation of 5.5kwhr/sq.mt, on a
Sector: Industries and Factories